PORSCHE 911 CHECK ON ORDER
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 2005-08 (includes uncategorized and accessory items)
Only for 997.1 with factory performance kit (x51). Also for 997.1 GT2 models.
A less restrictive, drop in sport air filter for the factory air box. Bmc filters deliver over 150% better air flow than stock paper air filters.
Lifetime filter element requires no replacement and minimal service.
Consider also:
Bmc cleaning kit
Part-470 500 355
Fits: Carrera 4s, 3.8l, 261kw (05-08), Carrera 4, 3.6l, 239kw (05-08), Carrera s, Carrera
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 2005-08
Manufactured from heavyweight black vinyl with an extra soft inner lining to preserve the paint and trim. A built-in pouch retains tools while you work on your Porsche. This is a special order item that will take longer to ship.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1998-05 911 TURBO/GT2 2001-05 911 GT3 2003-05 911 2005-08 911 GT3 2007-11
Catalytic bypass pipes for use with our Brombacherexhaust system. This setup offers the ultimate in performance and sound for your turbo.
Gain of 21 hp and 18 lb/ft of torque
70 mm diameter tubing throughout
Please note- ecu programming will be necessary in order to avoid a check engine light.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 2005-08
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
Special order item !
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning (includes FVD software, sport airfilter and exhaust):
Max. Power - 283kw (3...(choose a part on the right to read more)
General Fitment 911 2005-08
$8,826.40
Make a selection
“brombacher” 997 tt stainless steel polished tips
Facts:
- 3" tubing (75mm), same diameter tubing as our muffler systems.
- weighs 7 lbs. (3,1 kg)
- t 316 stainless steel for improved durability over t 304.
- “quad” style tips
- made in Germany
- will not fit stock mufflers! These tips only work in conjunction with our “brombacher” sport mufflers, ie part # bes 997 152 40s
Please note: using stock tips on our sport mufflers without these tips will cause hp loss. Once you restrict the diameter of the piping a small percentage of power is robbed.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check ...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,068.10
Make a selection
Our tool is designed to replace the intermediate shaft bearing without engine disassembly.
This process can be completed with our tool without any damage to the crankcase or intermediate shaft. It is also possible with our tool to extract the bearing if the center stud or bearing is broken.
Kit includes:
- bearing puller/adapter to extract the existing bearing
- bearing driver tool to install the new bearing
- crankshaft lock pin (pulley tdc) to secure the engine at the correct position
- made in Germany
Fits: Carrera 4s, 3.8l, 261kw (05-08), Carrera 4, 3.6l, 239kw (05-08), Carrera s, Carrera, c4s 3.6 (02-05), c4 3.6 (02-05), c2 3.6 (02-05), c4 3.4 (99-01), c2 3.4 (98-01), s sport 3.4, 223 kw (0...(choose a part on the right to read more)
General Fitment 911 2005-08 911 1998-05 CAYMAN 2006-08 BOXSTER 2005-08 BOXSTER 1997-04
- equal length headers with long tube design
- 200 cell German hjs "hd" racing sport catalysts with "u torque" design.
- 2 3/4" tubing (70mm)
- rsr style connections and quick release clamps
- quad 3.5" (90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only.
- weighs 62 lbs.(28,0 kg).
Please note: this exhaust is a special order item ! Typically lead time is 2-3 weeks from Germany.
Performance gains (includes FVD software, sport airfilter and exhaust), based on the 3.8 l:
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 441nm (325lbf ft) @ 4000rpm
Max. Speed - 307km/h
Max. Rpm - 7900rpm
Acceleration 0-100km/h - 4.4s
Our "brombacher" sys...(choose a part on the right to read more)
General Fitment 911 2005-08
From $8,686.70
Make a selection
Brombacher 997 tt (sound version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 36 lbs. (16.5 kg)
- t 316 stainless steel for improved durability over t 304
- 98db at idle and partial rpms, 100 db at wide open throttle
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,130.40
Make a selection
"brombacher" (sound version) stainless steel mufflers
(3.6l model need end tips from 3.8l model, FVD 111 997 01 or FVD 111 997 03, larger pipe implementing equal more power).
Facts (based on 997s):
- + 10 crank hp & + 10 crank torque
- 2 1/2? (63.5 mm) diameter tubing (reduces thermal stress)
- weighs 33 lbs. (15,0 kg)
- t 316 stainless steel for improved durability over t 304
- factory stamped for true Porsche sound
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
The export sound version of our "brombacher" sport mufflers gives the 997 a more pronounced, aggressive sound compared to factory mufflers. These end-muffl...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,786.40
Make a selection
TUV version
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 36 lbs. (16.5 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5" (90mm) tips and are made for this muffler. Kindly order bes 997 160 41s separately.
FVD le...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,479.10
Make a selection
"brombacher" 997 tt (sound version) titanium 4 chamber exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts with titanium outer shell
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9kg)!
For comparison the stainless version weighs 51 lbs. (23 kg)
- 1000 degree celcius, high grade titanium material
- 4 x 3.25"(80mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary...(choose a part on the right to read more)
General Fitment 911 2005-08
$12,320.00
Make a selection
Exhaust system with valves for the 997 -08
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning (incl...(choose a part on the right to read more)
General Fitment 911 2005-08
$9,385.20
Make a selection
Fits: Carrera 4s, 3.8l, 261kw (06-08), Carrera 4, 3.6l, 239kw (06-08), Carrera s, Carrera
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 2005-08
M&m street-sport pdk muffler for 2009- 997.2 / 997.2s
Facts:
- + 18 crank hp & + 15 crank torque
- 2 ½” (63.5 mm) diameter tubing (reduces thermal stress)
- weighs 42 lbs. (19.5 kg)
- replaces OEM primary and secondary mufflers
- reuses OEM headers and 600 cell cats (no cel, retains OEM software)
- t 316 stainless steel for improved durability over t 304
- intoxicating growl at idle, partial throttle and wide open throttle. This system was designed for pdk cars as it has zero drone inside the cabin. It is also perfect for those who are interested in our street sport system but find it a little to loud for their liking.
- no dme programming necessary
-reuses factory tips or any aftermarket tip d...(choose a part on the right to read more)
General Fitment 911 2005-08
$3,529.90
Make a selection
Brombacher 997 tt (super sound version) stainless steel exhaust system
Facts:
- + 35 crank hp & + 25 crank torque (if pressure sensor is adjusted via software)**
- catalytic bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purcha...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12 911 TURBO/GT2 2007-09
$2,117.50
Make a selection
"brombacher" stainless steel exhaust system with valves for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
The stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$9,992.40
Make a selection
FVD primary muffler bypass system for 2009- 997/997s
Fit with and without factory sport valved exhaust !
Facts (based on 997s):
- + 5 crank hp & + 4 crank torque gain
- 2 1/2" (63.5 mm) diameter tubing (reduces thermal stress)
- 5.5 lbs weight savings
- t 316 stainless steel for improved durability over t 304
- adjustable design for easy installation
- includes quick release clamps
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
- fits with or without sound switch system
- weight: 4.6kg (10.14lbs)
Figures (based on 997s):
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,543.30
Make a selection
If your 997 already has the valved sport exhaust system this header and 200 cell cat setup can be used for an increadible sound and performance gain. Due to the larger 63,5mm pipe diameter up to the flange the sound will be intense when the sport valves are opened and also result ina deaper tone, even when the valves are closed. Additionaly you'll be able to gain up to 15hp
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 2005-08
$5,035.80
Make a selection
This anodized aluminum spacer allows you to mount wider-offset wheels and gain brake caliper clearance. Includes longer bolts.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment BOXSTER 1997-04 911 1998-05 BOXSTER 2005-08 CAYMAN 2006-08 911 GT3 2007-11 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05
For 997-2 with OEM or valved Porsche® sport exhaust (pse).
Facts:
- equal length headers with long tube design
- 200 cell hf German hjs tri metal sport cats
- 2 3/4" tubing (70mm)
- replaces the primary “center” muffler and connects to the factory Porsche® pse muffler's directly.
- made in Germany
Power:
- 997.2 (3,6l) = + 20 crank hp (15 kw) & + 15 crank torque (20 nm)
- 997.2s (3,8l) = + 23 crank hp (18kw) & 22 crank torque (30nm)
- with FVD flashclient software = + 37 crank hp (28kw) & + 30 crank torque (40 nm)
Tech tip:
Dme (catalytic adjustment) needs to be programmed!
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be ca...(choose a part on the right to read more)
General Fitment 911 2005-08
$4,549.60
Make a selection
M&m 997.2 tt stainless steel polished tips
Facts:
- 3" tubing (75mm), same diameter tubing as our muffler systems.
- weighs 7 lbs. (3,1 kg)
- t 316 stainless steel for improved durability over t 304.
- “quad” style tips, inner tip is 4” (102mm) in diameter and outer is 3.5” (90mm)
- made in Germany
- will not fit stock mufflers! These tips only work in conjunction with our m&m sport mufflers, ie part # rbes99725240s
Please note: using stock tips on our sport mufflers without these tips will cause hp loss. Once you restrict the diameter of the piping a small percentage of power is robbed.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it c...(choose a part on the right to read more)
General Fitment 911 2005-08
M&m street-sport muffler system for 2009- 997.2 / 997.2s
Facts:
- + 15 crank hp & + 13 crank torque
- 2 ½” (63.5 mm) diameter tubing (reduces thermal stress)
- replaces OEM primary and secondary mufflers
- reuses OEM headers and 600 cell cats (no cel, retains OEM software)
- weighs 20.94 lbs. (9.5 kg)
- 33 lb. Weight savings over factory system
- t 316 stainless steel for improved durability over t 304
- uses the spring lock race system design to dampen vibration
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
-reuses factory tips or any aftermarket tip designed to fit OEM exhaust (3.6 l models will require 3.8 l tips due to diameter diff...(choose a part on the right to read more)
General Fitment 911 2005-08
$2,660.90
Make a selection
The differences are day? And night!
Gauge faces are one of the most visible and frequently looked at components in your Porsche. Why skimp on quality? Gauge faces should have clearly visible markings and be easy to read with and without back lighting. Replacement faces should offer similar qualities, but many gauge faces on the market don?t quite make the grade. FVD gauge faces are different. What makes them different you ask? See for yourself.
In the below pictures you will see that the tiptronic is an FVD gauge face and the 6 speed gauge face is the competitions.
The daytime difference (the competition):
Darker, more yellow appearance
Raised orange warning lights, not flush
Larger, bolder script...(choose a part on the right to read more)
General Fitment PANAMERA 2010-14 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2009-12 911 2005-08 CAYMAN 2009-12 CAYMAN 2006-08 BOXSTER 2009-11 BOXSTER 2005-08
Tip's are both 3 inches in diameter.
Tips only fit FVD Brombacherturbo exhaust systems with part numbers starting with rbes
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 2005-08
$1,971.20
Make a selection
The differences are day and night! Gauge faces are one of the most visible and frequently looked at components in your Porsche. Why skimp on quality? Gauge faces should have clearly visible markings and be easy to read with and without back lighting. Replacement faces should offer similar qualities, but many gauge faces on the market don't quite make the grade. FVD gauge faces are different. What makes them different you ask? See for yourself. In the below pictures you will see that the tiptronic is an FVD gauge face and the 6 speed gauge face is the competitions. The daytime difference (the competition): darker, more yellow appearance raised orange warning lights, not flush larger, bolder script than the fact...(choose a part on the right to read more)
General Fitment 911 2005-08
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|